|
|
|
1 SN - HYDRAULIC SINGLE BRAID HOSE
| 1 SN (SAE 100R1 AT)
|
Single braided hose, according to DIN EN853, designed for hydraulic systems using hydraulic fluids based on mineral and synthetic oils (HL, HLP, HLPD, HVLP), emulsions based on mineral oils (HFAE, HFAS, HFB), fluids based on glycols (HFC ), lubricants based on vegetable and mineral oils, cooling water and compressed air
Not suitable for hydraulic fluids based on phosphate ester (HFD)
Conditionally suitable for biodegradable hydraulic fluids (HETG, HEPG, HEES).
In case of use of the sleeve for other purposes, it is necessary to consult with the manufacturer.
|
| STRUCTURE OF THE SLEEVE: |
| Inner layer: |
oil resistant synthetic rubber |
| Gain: |
one layer of wire braid |
| Outer layer: |
abrasion resistant synthetic rubber |
| Working temperature: |
- 40° Ñ to + 100° Ñ (short-term up to + 120° Ñ max.) |
| Nominal diameter |
Inner diameter |
Braid diameter |
Outside diameter |
Operating pressure |
Burst pressure |
Bending radius |
Weight |
| mm |
inch |
mm |
mm |
mm |
bar |
bar |
mm |
kg/m |
| 5 |
3/16 |
4,8 |
9,5 |
11,8 |
250 |
1000 |
90 |
0,19 |
| 6 |
1/4 |
6,4 |
11,1 |
13,4 |
225 |
900 |
100 |
0,21 |
| 8 |
5/16 |
7,9 |
12,7 |
15,0 |
215 |
850 |
115 |
0,24 |
| 10 |
3/8 |
9,5 |
15,1 |
17,4 |
180 |
720 |
130 |
0,33 |
| 12 |
1/2 |
12,7 |
18,3 |
20,6 |
160 |
640 |
180 |
0,41 |
| 16 |
5/8 |
15,9 |
21,4 |
23,7 |
130 |
520 |
200 |
0,45 |
| 19 |
3/4 |
19,0 |
25,4 |
27,7 |
105 |
420 |
240 |
0,58 |
| 25 |
1 |
25,4 |
33,3 |
35,6 |
88 |
350 |
300 |
0,88 |
| 31 |
1-1/4 |
31,8 |
40,5 |
43,5 |
63 |
250 |
420 |
1,23 |
| 38 |
1-1/2 |
38,1 |
46,8 |
50,6 |
50 |
200 |
500 |
1,51 |
| 51 |
2 |
50,8 |
60,2 |
64,0 |
40 |
160 |
630 |
1,97 |
|
Note: It must be remembered that due to prolonged use of the hose at the operating limits (maximum working pressure, maximum temperature, minimum bending radius), the service life of the hose is reduced!
|
UP
|
