High-pressure hoses

HYDROPAPA

+380445015929

+380675072240

+380674650171

+380955382171

+380636499813

Email:   hydropapa@ukr.net

 

2 SN - HYDRAULIC DOUBLE BRAID HOSE

2 SN (SAE 100R2 AT)

Sleeve 2 SN (SAE 100R2 AT)

Double braided hose, according to DIN EN853, designed for hydraulic systems using hydraulic fluids based on mineral and synthetic oils (HL, HLP, HLPD, HVLP), emulsions based on mineral oils (HFAE, HFAS, HFB), fluids based on glycols ( HFC), lubricants based on vegetable and mineral oils, cooling water and compressed air


Not suitable for hydraulic fluids based on phosphate ester (HFD)


Conditionally suitable for biodegradable hydraulic fluids (HETG, HEPG, HEES).
In case of use of the sleeve for other purposes, it is necessary to consult with the manufacturer.

STRUCTURE OF THE SLEEVE:
Inner layer: oil resistant synthetic rubber
Gain: two layers of wire braid
Outer layer: abrasion resistant synthetic rubber
Working temperature: - 40° Ñ to + 100° Ñ (short-term up to + 120° Ñ max.)
Nominal diameter Inner diameter Braid diameter Outside diameter Operating pressure Burst pressure Bending radius Weight
mm inch mm mm mm bar bar mm kg/m
5 3/16 4,8 11,1 13,4 415 1650 90 0,31
6 1/4 6,4 12,7 15,0 400 1600 100 0,33
8 5/16 7,9 14,3 16,6 350 1400 115 0,39
10 3/8 9,5 16,7 19,0 330 1320 130 0,50
12 1/2 12,7 19,8 22,2 275 1100 180 0,59
16 5/8 15,9 23,0 25,4 250 1000 200 0,71
19 3/4 19,0 27,0 29,3 215 850 240 0,86
25 1 25,4 34,9 38,1 165 650 300 1,28
31 1-1/4 31,8 44,5 48,3 125 500 420 2,02
38 1-1/2 38,1 50,8 54,6 90 360 500 2,23
51 2 50,8 63,5 67,3 80 320 630 2,85
Note: It must be remembered that due to prolonged use of the hose at the operating limits (maximum working pressure, maximum temperature, minimum bending radius), the service life of the hose is reduced!
UP