High-pressure hoses

HYDROPAPA

+380445015929

+380675072240

+380674650171

+380955382171

+380636499813

Email:   hydropapa@ukr.net

 

4 SP - HYDRAULIC SPIRAL HOSE WITH FOUR COILS

4 SP

Sleeve 4 SP

Four-coiled (spiral) sleeve, corresponds DIN EN856, designed for hydraulic systems using hydraulic fluids based on mineral and synthetic oils(HL, HLP, HLPD, HVLP), emulsions based on mineral oils (HFAE, HFAS, HFB), liquids based on glycols (HFC), lubricants based on vegetable and mineral oils, cooling water and compressed air


Not suitable for hydraulic fluids based on phosphate ester (HFD)


Conditionally suitable for biodegradable hydraulic fluids (HETG, HEPG, HEES).
In case of use of the sleeve for other purposes, it is necessary to consult with the manufacturer

STRUCTURE OF THE SLEEVE:
Inner layer: oil resistant synthetic rubber
Gain: four layers of wire spiral
Outer layer: abrasion resistant synthetic rubber
Working temperature: - 40° Ñ to + 100° Ñ (short-term up to + 120° Ñ max.)
Nominal diameter Inner diameter Braid diameter Outside diameter Operating pressure Burst pressure Bending radius Weight
mm inch mm mm mm bar bar mm kg/m
10 3/8 9,5 17,5 21,4 445 1780 180 0,78
12 1/2 12,7 20,2 24,6 415 1660 230 0,93
16 5/8 15,9 23,8 28,2 350 1400 250 1,17
19 3/4 19,0 28,2 32,2 350 1400 300 1,48
25 1 25,4 35,3 39,7 280 1120 340 2,02
31 1-1/4 31,8 46,0 50,8 210 840 460 3,05
38 1-1/2 38,1 52,4 57,2 185 740 560 3,52
51 2 50,8 65,3 69,8 165 660 660 5,20
Note: It must be remembered that due to prolonged use of the hose at the operating limits (maximum working pressure, maximum temperature, minimum bending radius), the service life of the hose is reduced!
UP