High-pressure hoses

HYDROPAPA

+380445015929

+380675072240

+380674650171

+380955382171

+380636499813

Email:   hydropapa@ukr.net

 

HYDRAULIC FITTINGS

   Hydraulic fittings are designed for completing hydraulic and pneumatic hoses.
   The fittings are manufactured in accordance with the EO-RoHS 2002/95EG Chrom VI-frei standard (galvanizing does not contain Chrom 6) and complies with ISO 9001:2000.

DKL, DKS

Fitting (nipple, nut) DKL, DKS

Fitting (nipple, nut) with connecting metric thread on the nut. The nipple has an outer cone of 24°. Cone seal. The fitting is made in light and heavy series ( L and S respectively) with a turn of 0°, 45° and 90°. Mating fitting CEL, CES.
DKOL, DKOS

Fitting (nipple, nut) DKOL, DKOS

Fitting (nipple, nut) with connecting metric thread on the nut. The nipple has an outer cone of 24° and an additional rubber “O” ring. Cone seal. The fitting is made in light and heavy series ( L and S respectively) with a turn of 0°, 45° and 90°. Mating fitting CEL, CES.
CEL, CES

Nipple CEL, CES

Male metric thread fitting with 24° female cone. Cone seal. Fitting is performed in light and heavy series ( L and S respectively). Mating fitting DKOL, DKOS or DKL, DKS.
AGJ

Nipple AGJ

Inch male UNF thread fitting with 74° male cone. Cone seal. Mating fitting DKJ.
AGR

Nipple AGR

BSP male inch thread fitting with 60° female cone. Cone seal. Mating fitting DKR.
DKJ

Fitting (nipple, nut) DKJ

Fitting (nipple, nut) with connecting inch UNF thread on the nut. The nipple has an internal cone of 74°. The fitting is made with a turn of 0°, 45° and 90°. Mating fitting AGJ.
DKR

Fitting (nipple, nut) DKR

Fitting (nipple, nut) with connecting inch BSP thread on the nut. The nipple has an outer cone of 60°. The fitting is made with a turn of 0°, 45° and 90°. Mating fitting AGR.
DK ORFS

Fitting (nipple, nut) DK ORFS

Fitting (nipple, nut) with connecting inch UNF thread on the nut. The nipple is flanged (flat). The fitting is made with a turn of 0°, 45° and 90°. Mating fitting AGF ORFS.
AGF ORFS

Nipple AGF ORFS

Nipple with external inch UNF thread. It has a flange design (flat), with a groove for a rubber “O” ring. Mating fitting DK ORFS.
BANJO RNR, RNM

Nipple BANJO RNR, RNM

The nipple is annular, with a longitudinal groove on both sides and a hole for a hollow bolt. Available in metric and inch versions.
SFL, SFS

Flanged nipple SFL, SFS

The nipple is flanged. Sealed with a rubber “O” ring. It is pressed, as a rule, by two semi-flanged connections, which are attached to the hydraulic unit with 4 bolts.
UP