|
|
|
HOSES FOR HYDRAULIC SYSTEMS
The hydraulic hose is designed for transporting mineral oils, air, water emulsions, etc. Working pressure from 40 to 1200 bar, depending on the diameter and number of braids (1, 2, 3, 4 and 6 braids).
The entire sleeve has a 4-fold safety margin. Temperature range of use from -40把 to +100把.
| 1 SN (SAE 100R1 AT)
|
Hose for hydraulic systems using hydraulic fluids based on mineral oil and glycol, for vegetable and mineral oils, crude oil, cold water, compressed air. Not suitable for ester-based hydraulic fluids. Hydraulic hose with single, elastic, cross-braided steel wire braid, outer sheath made of synthetic, abrasion-resistant rubber. The inner layer is made of synthetic oil and petrol resistant rubber. Temperature range of use from -40把 to +100把. Hydraulic hose according to DIN EN853 and SAE 100R1AT. |
| 2 SN (SAE 100R2 AT)
|
Hose for hydraulic systems using hydraulic fluids based on mineral oil and glycol, for vegetable and mineral oils, crude oil, cold water, compressed air. Not suitable for ester-based hydraulic fluids. Hydraulic hose with double, elastic, cross-braided steel wire braid, outer sheath made of synthetic, wear-resistant rubber. The inner layer is made of synthetic oil and petrol resistant rubber. Temperature range of use from -40把 to +100把. Hydraulic hose according to DIN EN853 and SAE 100R1AT. |
| R 16 (SAE 100R 16 AT)
|
Hose for hydraulic systems using hydraulic fluids based on mineral oil and glycol, for vegetable and mineral oils, crude oil, cold water, compressed air. Not suitable for ester-based hydraulic fluids. Hydraulic hose with double, elastic, cross-braided steel wire braid, outer sheath made of synthetic, wear-resistant rubber. The inner layer is made of synthetic oil and petrol resistant rubber. Temperature range of use from -40把 to +125把. Hydraulic hose conforms to SAE 100R 16. |
| 4 SP
|
Hose for hydraulic systems using hydraulic fluids based on mineral oil and glycol, for vegetable and mineral oils, crude oil, cold water, compressed air. Not suitable for ester-based hydraulic fluids. Hydraulic hose with four-layer, elastic steel wire winding, outer sheath made of synthetic, wear-resistant rubber. The inner layer is made of synthetic oil and petrol resistant rubber. Temperature range of use from -40把 to +100把. Hydraulic hose conforms to DIN20023, EN856 4SP. |
| 4 SH
|
Hose for hydraulic systems using hydraulic fluids based on mineral oil and glycol, for vegetable and mineral oils, crude oil, cold water, compressed air. Not suitable for ester based hydraulic fluids. Hydraulic hose with four-layer, elastic steel wire winding, outer sheath made of synthetic, wear-resistant rubber. The inner layer is made of synthetic oil and petrol resistant rubber. Temperature range of use from -40把 to +100把. Hydraulic hose conforms to DIN20023, EN856 4SH. |
| R7
|
Hose for hydraulic systems, with fiber braid. The sleeve consists of an inner nylon tube, high strength fiber braid, the outer layer is made of high protein nylon. The advantage of this sleeve is its extreme flexibility and lightness. Temperature range of use from -40把 to +100把. Hydraulic hose conforms to SAE 100R7, EN855 R7. |
| R14 (PTFE 1)
|
Hose is made from an internal heat-resistant, corrosion-resistant Teflon (PTFE) tube. The outer braid is stainless steel wire. The advantages of this sleeve are the ability to work at high temperatures and resistance to aggressive environments. Temperature range of use from -40把 to +260把. Sleeve complies with SAE 100R14. |
UP
|
